Electronic

Features

Adds lengths, measures distances, areas and volumes with a laser pointer for accuracy
Easy to read 5 digit LCD screen
‘SET’ feature to select measurements from top or bottom of case
Auto power off
Conversion of readings between imperial and metric
Light weight and ergonomic
Features laser pointer for accuracy
Low battery power indication

Specifications

Ultrasonic measurement: 0.6 - 15m
Accuracy: +/- 0.5% +/- 1 digit
Calculation range:
Length 99,999m
Area 420.25m2
Volume 8615.1m3
Aperture angle: +/- 0.5° (approx.)
Beam angle: 5° (+/-) at half power
Battery type: 9v

Included as Standard: Pouch, 1 x 9v battery

Features
Project Calculator with Laser Pointer and Voice Recording Function
Calculates areas & volumes for carpet, paint, tiles, wallpaper & size of radiator for home renovation
Measures distances, areas and volumes with a laser pointer for accuracy
Features voice recording function - no need to make measurement notes
Auto power off
LCD screen with green back light

Specification
Measuring range: 0.6 - 18m
Accuracy: +/- 0.5% +/- 1 digit
Calculation range:
Length 99,999m
Area 420.25m2
Volume 8615.1m3
Aperture angle: +/- 5° (approx.)
Battery: 4AA 1.5v
Voice recording time: 20 sec
LCD Resolution: 0.01m

Included as Standard: Pouch, 1.5 AAA x 4

Detects wood and metal studs in dry line walls with +/- 4mm (1/6in) accuracy
3 LED’s to indicate stud approach and edge detection
Integrated belt clip for convenient carrying
High impact housing
Soft touch rubber grip
Automatic shut off
Patented ASIC technology

Stud sensor measurement:
Wood/metal stud edge detection on 12.5mm (1/2in), 16mm (5/8in) & 19mm
(3/4in) dry wall with accuracy up to +/- 4mm (1/6in)
Auto shut off: Yes
Battery: 9v

Included as Standard : 9v battery, soft touch case

Measures distance and volume with pin-point accuracy.
Locates wood, metal and wiring in dry lined stud walls.
Measures distances using the speed of sound and laser pointer for accuracy.
Adds up continuous lengths for skirting boards, dado rails, picture rails etc.
Stud sensor measurement: Wood / Metal up to 38mm (1 1/2in) dry wall with centre accuracy up to +/- 12.5mm (1/2in).
Ultrasonic measurement: 60cm - 15m (2ft - 50ft).
Ultrasonic accuracy: +/- 0.5%, 0-1 digit.
Auto beep stud detection: Yes.
Auto shut-off: Yes.
Battery: 9volt.
2 year warranty.

3 mode detector, wood / metal studs, metal and electrical wiring, with LCD display and audio indication. Auto power off after 2 minutes. Ideal for both trade and DIY. 9V battery and case included.

Stud sensor measurement :-

Drywall depth up to 38mm for wood and 51mm for metal and metal rebar.

Detects rebar up to 51mm in concrete and brick.

Sturdy 25 feet (7.5m) steel tape.
Easy-to-read 6 digit LCD display.
Addition of lengths up to 99 lengths.
Mid point computation.
Add / subtract the case length.
Conversion between imperial and metric systems.
Memory in / recall.
Display freeze function.
Auto power off after 3 minutes.
Tape width: 25mm
Blade markings: Feet / inches cumulative inches, metric units.
Automatic self calibration: Yes.
Auto shut off: Yes
Low battery indicator: Yes
Batteries: Replaceable 3 x 1.5v button cell batter.
2 year warranty.

INCLUDED AS STANDARD
Spring steel belt clip.